TELECOM INFRASTRUCTURE POWER PROTECTION • Zero Signal Outages
Power Conditioning Solutions for Telecom Infrastructure
Prevent dropped calls, DC rectifier failures, and RF interference across 4G/5G cellular towers, fiber switching nodes, and satellite exchanges with Voltkon’s unbalanced-load 3-phase Servo Stabilizers and Isolation Transformers.
TELECOM POWER PROTECTION SOLUTIONS
Continuous Power for Towers & Switching Nodes
Cellular BTS sites and remote optical nodes are often located in areas with severe rural grid voltage fluctuations, phase unbalance, and high neutral-to-earth noise. Voltkon power solutions stabilize incoming grid power and safeguard DC plant rectifiers.
BTS Towers & RRH
Unbalanced-Load Servo Stabilizers
Features 3 independent servo motors and digital CPU sensing for each phase. Corrects severe phase voltage unbalance commonly found at remote BTS tower locations.
15 kVA - 500 kVA
Individual Phase Control
Outdoor Weatherproof IP54
RF Noise & Neutral Shield
Isolation Transformers
Filters high-frequency radio frequency (RF) interference, common-mode line noise, and lightning surges from affecting sensitive transceiver cards and DC battery rectifiers.
5 kVA - 300 kVA
Electrostatic Shielding
Low Neutral Drift
Exchanges & Optical POPs
Online Double Conversion UPS
Delivers continuous, zero-break AC power to telephone switching exchanges, fiber optic main points of presence (POP), and satellite uplink modems.
5 kVA - 250 kVA
Zero Transfer Time
Pure Sine Wave
TELECOM CAPACITY SIZING GUIDE
Recommended kVA Ratings for Telecom Facilities
Selecting proper power conditioning capacity protects DC plant rectifiers and prolongs battery bank lifespans. Refer to our sizing guide below:
VOLTKON TELECOM SHIELD
Why Telecom Infra Operators Trust Voltkon
1
Independent 3-Phase Servo Control
Each phase is regulated independently, allowing full ±1% accuracy even under 100% phase voltage unbalance at remote tower sites.
2
100% Electrolytic Copper Windings
Heavy-gauge copper coils withstand severe surge loads and provide low operating temperatures under continuous 24/7 duty cycles.
3
Built-in Surge Suppression & Neutral Isolation
Protects sensitive radio transceivers against lightning surges, switching transients, and ground-potential rises.
4
Dasna Factory Burn-In & Rapid Nationwide AMC
Rigorously tested at our Dasna facility and backed by nationwide field technicians for uninterrupted network availability.
TELECOM QUOTE INQUIRY
Need Support for Telecom Power Conditioning?
Send your tower site details, connected kVA load, or phase voltage unbalance issues. Voltkon application engineers will provide a detailed technical recommendation within 30 minutes.
⚡ Direct Technical Support:
Speak directly with our senior telecom power engineering team for site sizing support.
+91 8700363797